Heat Transfer Application / Directions

For Non-Synthetic Fabrics (Ex. Cotton T-Shirts)
Recommended Fabrics:
1. Cotton
2. Uncoated Polyester
3. Poly/Cotton Blends
4. Lycra/Spandex Blends
5. Polypropylene
* Not for use on sublimated garments and 100% polyester materials such as jerseys.

Heat Directions / Application:
*Professional heat press required
1. Set your heat settings to 320 degree F.
2. Prior to application, heat press your garment for about 5 second to give a nice clean even printable surface.
3. Peel away the backing paper of heat transfer and position the transfer in place.
4. Place a teflon sheet over the heat transfer and press for 15-20 seconds with medium pressure.
5. Peel warm!
6. Once transfer mask is peeled, replace the teflon sheet over the graphic and press for about 5 seconds to seal the edges.
7. For the rear side of garment, repeat steps 2-5. Placing an additional teflon sheet under the completed garment side, which should be facing down, is highly recommended!

For Synthetic Fabrics (Ex. Jerseys)
Recommended Fabrics:
1. Cotton, Uncoated Polyester, Poly/Cotton Blends, Lycra, Spandex Blends, Woven Nylons, Nylon Knits, Nylon meshes - micro, tricot, Mini - Reversible, Polyester Knits, Polyester Meshes, Sublimated Polyester, Poly/Foam and Cotton Caps, Cordura, Satin

Heat Directions / Application:
*Professional heat press required
1. Set your heat settings to 330 degree F.
2. Prior to application, heat press your garment for about 5 second to give a nice clean even printable surface.
3. Peel away the backing paper of heat transfer and position the transfer in place.
4. Place a teflon sheet over the heat transfer and press for 3 sec with firm pressure.
5. Peel Warm! Once transfer mask is peeled, replace the teflon sheet over the graphic and press for an additonal 12-15 sec.
6. For the rear side of garment, repeat steps 2-5. Placing an additional teflon sheet under the completed garment side, which should be facing down, is highly recommended!

Glitter Flake Heat Transfers
Recommended Fabrics:
1. Cotton
2. Uncoated Polyester
3. Poly/Cotton Blends

Heat Directions / Application:
*Professional heat press required
1. Set your heat settings to 320 degree F.
2. Prior to application, heat press your garment for about 5 second to give a nice clean even printable surface.
3. Peel away the backing paper of heat transfer and position the transfer in place.
4. Place a teflon sheet over the heat transfer and press for 15-20 seconds with firm pressure.
5. Peel Cold!
6. For the rear side of garment, repeat steps 2-5. Placing an additional teflon sheet under the completed garment side, which should be facing down, is highly recommended!

Metallic Foil Heat Transfers
Recommended Fabrics:
1. Cotton
2. Uncoated Polyester
3. Poly/Cotton Blends
Heat Directions / Application:
*Professional heat press required
1. Set your heat settings to 305 degree F.
2. Prior to application, heat press your garment for about 5 second to give a nice clean even printable surface.
3. Peel away the backing paper of heat transfer and position the transfer in place.
4. Place a teflon sheet over the heat transfer and press for 15-20 seconds with firm pressure.
5. Peel Cold!
6. For the rear side of garment, repeat steps 2-5. Placing an additional teflon sheet under the completed garment side, which should be facing down, is highly recommended!